FAA pauses Juniper router installations after nationwide ground stop

Tom Brenner/AP via CNN Newsource

By Pete Muntean

(CNN) — The FAA is pausing the installation of new Juniper telecommunications routers as it investigates last week’s nationwide ground stop, an agency spokesperson told CNN.

The move, first reported by The Wall Street Journal, comes as investigators work to determine whether the communications failure was caused by defective equipment, or an installation or configuration error.

A spokesperson for HPE, the router manufacturer’s parent company, told the Wall Street Journal its equipment was working as configured. CNN has reached out to Juniper Networks for comment.

Democrats on the Senate committee overseeing aviation called for an immediate halt to new router installations Tuesday, questioning whether the equipment underwent adequate testing and why the FAA’s backup systems failed to prevent the widespread disruption.

The senators said FAA contractor L3Harris plans to install 3,648 Juniper routers, with 400 installed so far and just 69 operational.

The FAA has not established a definitive root cause of the outage, which affected communications and radar feeds at 17 of the nation’s 22 en route air traffic control centers.

Transportation Secretary Sean Duffy previously said upgrade work on an old telecommunications system could be a cause for the nationwide ground stop, noting L3Harris was doing routine maintenance to switch telecommunication lines from an old copper wire to fiber in at least one remote FAA location.

L3Harris has said it is working with the FAA to investigate the incident.

The-CNN-Wire
™ & © 2026 Cable News Network, Inc., a Warner Bros. Discovery Company. All rights reserved.

CBS 58 Weather Forecast

Close